Rail King RAILKING F-3 AA SET Instructions d'exploitation Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
21
RailKing F-3 AA Set Operating Manual
Resetting All Proto-Sound® Options To Factory Defaults
-
Reset 18-(3 Clanks, 3 Clinks)
Reset 18 is the most powerful
of the Reset features
available. Using Reset 18
allows you to override all
changes in programming and
return all Resets to the
original, out of the box
settings. To use, cycle to
Reset 18 and press the Horn/Whistle button. The engine will play a
distorted bell, followed by a clear bell sound. This indicates that the
Proto-Sound system has restored all settings to factory default settings.
Lock the changes by interrupting the throttle and cycling the engine into
forward.
Turning Off Cab Chatter Sounds- Reset Feature 23 (4 Clanks,
3 Clinks)
Reset Feature 23 allows
you to turn the operation of
the Cab Chatter system on
or off. When OFF, the Cab
Chatter recordings will not
be played when the engine
is in Neutral. To use, cycle
to Reset 23 and press the
Horn/Whistle button. The engine will play a series of bells. This indicates
the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator. The settings for Reset Feature 23 are 1 Bell =
ON, 2 Bells = OFF. When the desired setting is reached, lock the changes
by interrupting the throttle and cycling the engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
18 Times
Listen For 3 Clank
And 3 Clink Sounds
Push The Whistle Button
Until You Hear
A Warbled Bell Ding
Interrupt The Throttle
To “Lock-In”
The Default Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
23 Times
Listen For 4 Clank
And 3 Clink Sounds
Push The Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Cab Chatter Setting
H
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Commentaires sur ces manuels

Pas de commentaire