Rail King RAILKING F-3 AA SET Instructions d'exploitation télécharger pdf (Page 11)

RailKing F-3 AA Set Operating Manual

Activating Passenger Sounds (PFA)- Detailed PFA Instructions

Arming The Passenger Sounds Feature

Before the Passenger Station sounds can be heard, the feature must be

activated. The feature can be activated in one of two ways.

ARMING THE PASSENGER SOUNDS FEATURE

Before the passenger station sounds can be heard, Proto-Sound must

activate the feature so that the next time the engine enters the neutral

position, the sounds can play, The feature can be activated one of two ways.

Option 1: If you are using the Z-4000™ transformer, or any transformer

with a separate bell button controller, you can activate the feature by simply

pressing and holding the bell button for at least three seconds (it does not

matter if you are in forward, neutral or reverse). You will hear the bell turn

on and, after three seconds, you should hear a short horn blast or air release.

Once the horn blast or air release is heard, the bell button can be released.

The bell will continue

to chime, so if you want

to turn off the bell

ringing, simply press

and release the bell

button. If you were in

neutral, interrupt the

transformer throttle to

enter the next directional state (either forward or reverse). (Note: the PFA

will only play in the first Neutral after it is armed. You can not interrupt

the power twice to enter another direction and still have the PFA active.)

You can now trigger the sounds to begin playing when you next enter

Neutral.

Option 2:

If you do not have a Z-4000™ transformer (or separate bell

button available), you can activate the PFA using your transformer’s whistle

button control. To arm the

PFA, turn on the

transformer throttle and

cycle your engine into

Neutral (not RESET).

Once in neutral, set the

transformer throttle to 8

Put Engine In Neutral,

Forward or Reverse

Press & Hold

The Railsounds® Bell Button

For 3 Seconds

Listen For The

Start Of The Bell Sound

Listen For The

Air Release Sound

After 3 Seconds

Put Engine In Neutral

At Low Power

Press & Hold

The Whistle Button

For 3 Seconds

Listen For The

Start Of The Bell Sound

Listen For The

Air Release Sound

After 3 Seconds

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Rail King RAILKING F-3 AA SET Instructions d'exploitation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets et accessoires Rail King RAILKING F-3 AA SET